TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Cruise Control / Lane Departure Alert System / Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / LKA/LDA / Trouble Codes.

(e) Check for DTCs.

Click here CLEAR DTC

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / LKA/LDA / Clear DTCs.

(e) Clear the DTCs.

    Related Tacoma materials

    ECU Power Source Circuit
    DESCRIPTION This circuit supplies power to the millimeter wave radar sensor assembly when the ignition switch is ON. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCEDURE ...

    Tire Pressure Warning Light Circuit
    DESCRIPTION If the tire pressure warning ECU and receiver detects any problems, the tire pressure warning light blinks for 1 minute then illuminates, and tire pressure monitoring is disabled at the same time. At this time, the ECU stores a DTC in memory. Connecting terminals TC and CG of the D ...

    Power Source Control ECU Malfunction (B2782)
    DESCRIPTION DESCRIPTION The certification ECU (smart key ECU assembly) has a power source mode switching function. This DTC is stored when the IGE input (the steering lock motor activation permission signal) sent directly from the certification ECU (smart key ECU assembly) to the steering lo ...