Toyota Tacoma (2015-2018) Service Manual: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Intuitive Parking Assist System|
DTC Code |
Detection Item |
See page |
|---|---|---|
|
C1AE6 |
Rear Left Sensor Malfunction |
|
|
C1AE7 |
Rear Left Center Sensor Malfunction |
|
|
C1AE8 |
Rear Right Center Sensor Malfunction |
|
|
C1AE9 |
Rear Right Sensor Malfunction |
|
|
C1AED |
Rear Sensor Communication Malfunction |
|
|
U0100 |
Lost Communication with ECM / PCM "A" |
|
|
U0101 |
Lost Communication with TCM |
|
|
U0142 |
Lost Communication with Body Control Module "B" |
|
|
U0155 |
Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) |
|
.gif)
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference
values. Do not depend solely on these reference values when dec ...
Lost Communication with ECM / PCM "A" (U0100-U0142,U0155)
DESCRIPTION
These DTCs are stored when the clearance warning ECU assembly cannot receive
and recognize several signals via the CAN communication system.
DTC No.
DTC Detection ...
Other materials:
Brake Booster Pump Motor on Time Abnormally Long (C1252)
DESCRIPTION
The motor relay (semiconductor relay) is built into the master cylinder solenoid
and drives the pump motor based on a signal from the skid control ECU (master cylinder
solenoid).
DTC No.
DTC Detecting Condition
Trouble Areas
C1252
...
Magnetic Clutch Relay
Inspection
INSPECTION
PROCEDURE
1. INSPECT MAGNET-CLUTCH RELAY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard:
Tester Connection
Specified Condition
3 - 5
...
Brake Warning Light does not Come ON
DESCRIPTION
The skid control ECU (brake actuator assembly) is connected to the combination
meter assembly via CAN communication.
WIRING DIAGRAM
Refer to Brake Warning Light Remains ON (See page
).
CAUTION / NOTICE / HINT
NOTICE:
When replacing the skid control ECU (brake actuator assembly) ...
