TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Lighting / Daytime Running Light Relay

Toyota Tacoma (2015-2018) Service Manual: Daytime Running Light Relay

Inspection

INSPECTION

PROCEDURE

1. INSPECT NO. 1 DAY TIME RUNNING LIGHT RELAY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard:

Tester Connection

Condition

Specified Condition

3 - 5

Battery voltage is not applied to terminals 1 and 2

10 kΩ or higher

Battery voltage is applied to terminals 1 and 2

Below 1 Ω

If the result is not as specified, replace the No. 1 day time running light relay.
    Related Tacoma materials

    Freeze Frame Data
    FREEZE FRAME DATA 1. DESCRIPTION The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or ...

    Magnetic Clutch Relay
    Inspection INSPECTION PROCEDURE 1. INSPECT MAGNET-CLUTCH RELAY (a) Check the resistance. (1) Using an ohmmeter, measure the resistance between the terminals. Standard: Tester Connection Specified Condition 3 - 5 ...

    Immobiliser System does not Operate Properly
    DESCRIPTION The engine immobiliser system compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. WIRING DIAGRAM (See page ). CAUTION / NOTICE / HINT ...