COMPONENTS
ILLUSTRATION

DisassemblyImmobiliser System does not Operate Properly
DESCRIPTION
The engine immobiliser system compares the ID code that is registered in the
certification ECU (smart key ECU assembly) with the ID code of the transponder chip
that is embedded in the electrical key transmitter sub-assembly.
WIRING DIAGRAM
(See page ).
CAUTION / NOTICE / HINT
...
Precaution
PRECAUTION
1. PRECAUTIONS WHEN USING TECHSTREAM
(a) When using the Techstream with the engine switch off to troubleshoot: Connect
the Techstream to the DLC3, and turn a courtesy light switch on and off at 1.5 second
or less intervals until communication between the Techstream and vehicle begin ...
Disassembly
DISASSEMBLY
PROCEDURE
1. FIX VANE PUMP
(a) Using SST, fix the vane pump assembly in a vise.
SST: 09630-00014
09631-00132
NOTICE:
When using a vise, do not overtighten it.
2. REMOVE VANE PUMP OIL RESERVOIR SUB-ASSEMBLY
(a) Remove the 3 bolts and vane pump oil reservoir.
(b) Remove the O-r ...