TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / CD Sound Skips

Toyota Tacoma (2015-2018) Service Manual: CD Sound Skips

PROCEDURE

1.

CHECK CD

(a) Check that the CD is not deformed or cracked.

OK:

No deformation or cracks on the CD
NG

CD IS FAULTY
OK

2.

CHECK CD

(a) Check the CD.

OK:

The CD is clean.

NOTICE:

Do not use a conventional record cleaner or anti-static preservative.

HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NG

CLEAN CD
OK

3.

REPLACE CD AND RECHECK

(a) Replace CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

OK

CD WAS FAULTY
NG

4.

CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Check the navigation receiver assembly installation condition.

(1) Check that the navigation receiver assembly is properly installed.

OK:

The navigation receiver assembly is properly installed.

OK

REPLACE NAVIGATION RECEIVER ASSEMBLY

NG

REINSTALL NAVIGATION RECEIVER ASSEMBLY
    Related Tacoma materials

    Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY (w/o Smart Key System) (a) Engage the 2 claws to install the un-lock warning switch assembly to the upper steering column bracket assembly. 2. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System) (a) T ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT DRIVE SHAFT (a) Coat the spline of the inboard joint shaft with gear oil. (b) Align the shaft splines and install the front drive shaft with a brass bar and hammer. NOTICE: Set the snap ring with the opening side facing downward. Be caref ...

    Removal
    REMOVAL CAUTION / NOTICE / HINT Text in Illustration *a Object Exceeding Weight Limit of Transmission Jack Be sure to perform this procedure with several people as the rear differential carrier assembly is very heavy. Be sure to follow the procedure ...