TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Brake Control / Dynamic Control Systems / Vehicle Stability Control System(for Hydraulic Brake Booster) / A-TRAC Indicator Light does not Come ON

Toyota Tacoma (2015-2018) Service Manual: A-TRAC Indicator Light does not Come ON

DESCRIPTION

The A-TRAC does not operate even if the A-TRAC switch is pressed under the following conditions:

  • The TRAC or VSC system is faulty.
  • The temperature inside the hydraulic brake booster increases and the A-TRAC operation is suspended.

WIRING DIAGRAM

Refer to A-TRAC Indicator Light Remains ON (See page CAUTION / NOTICE / HINT ).

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ). Inspect the fuses for circuits related to this system before performing ).
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1.

CHECK CAN COMMUNICATION SYSTEM

NG

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

OK

2.

CHECK HARNESS AND CONNECTOR (ATRC TERMINAL)

NG

GO TO STEP 4

OK

3.

READ VALUE USING TECHSTREAM (A-TRC(TRAC) SWITCH)

OK

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

NG

REPLACE MASTER CYLINDER SOLENOID

4.

INSPECT A-TRAC SWITCH

NG

REPLACE A-TRAC SWITCH

OK

5.

INSPECT ROOF CONSOLE BOX ASSEMBLY

A

REPAIR OR REPLACE HARNESS OR CONNECTOR (MASTER CYLINDER SOLENOID - ROOF CONSOLE BOX ASSEMBLY)
B

REPLACE ROOF CONSOLE BOX ASSEMBLY

C

REPLACE ROOF CONSOLE BOX ASSEMBLY

    Related Tacoma materials

    Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each sy ...

    Indicators and warning lights
    The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. Instrument cluster Center panel ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. ...

    Slip Indicator Light Remains ON
    DESCRIPTION The slip indicator light blinks during VSC or TRAC and AUTO LSD operation. When the system fails, the slip indicator light comes on to warn the driver. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (master cylinder solenoid), perform ...