TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Brake Control / Dynamic Control Systems / Vehicle Stability Control System(for Hydraulic Brake Booster) / System Diagram

Toyota Tacoma (2015-2018) Service Manual: System Diagram

SYSTEM DIAGRAM

Transmitting ECU (Transmitter)

Receiving ECU

Signals

Communication Method

ECM

Skid control ECU
  • Throttle position signal
  • Engine speed signal
  • Accelerator pedal position signal
  • Intake air temperature signal
  • Ambient air temperature signal
  • Engine coolant temperature signal
  • Vehicle information

CAN communication system

Yaw rate and acceleration sensor (Airbag sensor assembly)

Skid control ECU

Yaw rate and acceleration signal

CAN communication system

Steering angle sensor (spiral cable with sensor sub-assembly)

Skid control ECU

Steering angle signal

CAN communication system

Skid control ECU

ECM

Throttle opening angle request signal

CAN communication system

Skid control ECU

Combination meter assembly
  • Warning/indicator light signal
  • Vehicle speed signal
  • Warning buzzer request signal

CAN communication system

4 wheel drive control ECU (for 4WD or w/ Rear Differential Lock)

Skid control ECU
  • 4WD position signal (for 4WD)
  • L4 position signal (for 4WD)
  • Rear differential lock position signal (for w/ Rear Differential Lock)

CAN communication system
    Related Tacoma materials

    Steering Angle Sensor Zero Point Malfunction (C1290)
    DESCRIPTION The skid control ECU (master cylinder solenoid) acquires steering angle sensor zero point every time the ignition switch is turned to ON and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. The ECU also stores the previous zero point. If the front wh ...

    Clutch Master Cylinder
    Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY (a) Install the clutch master cylinder assembly to the clutch pedal support with the 2 bolts. Torque: 12 N·m {120 kgf·cm, 9 ft·lbf} (b) Install the clutch start swi ...

    Rear Left Sensor Malfunction (C1AE6)
    DESCRIPTION The No. 1 ultrasonic sensor (rear corner sensor LH) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (rear corner sensor LH). If the No. 1 ultrasonic sensor (rear corner sensor LH) has an open circuit or other ma ...