The meters provide the driver with a variety of important driving and vehicle information, allowing key Toyota Tacoma operating conditions to be checked at a glance.
Meter display
The measurement units shown on the meter and display may vary depending on the target region and the specifications of the Toyota Tacoma.
- Engine coolant temperature gauge
Displays the current engine coolant temperature, helping the driver monitor the engine's operating temperature. - Outside temperature
Displays the outside ambient temperature for convenient reference while driving. - Analog meter
The dial type of the analog meter can be changed using the corresponding setting
on the multi-information display, allowing the available meter presentation to be selected.
Tachometer: Displays the engine speed in revolutions per minute, providing a clear indication of current engine operation.
Analog speed meter: Displays the current vehicle speed in an analog format for easy monitoring while driving.
- Digital speedometer
Displays the Toyota Tacoma vehicle speed numerically, providing a precise and easy-to-read speed indication. - Shift position and shift range indicator
Displays the currently selected shift position or selected shift range so the driver can confirm the transmission operating state. - Clock
Automatically adjusts the displayed time using GPS time information through the GPS clock function. For additional information about clock settings and operation, refer to the "MULTIMEDIA OWNER'S MANUAL". - Fuel gauge
Displays the approximate quantity of fuel remaining in the tank so the driver can monitor the available fuel level.In the following situations, the actual amount of fuel remaining in the tank may not be represented accurately by the gauge. The displayed level may temporarily differ from the actual quantity because of fueling conditions or vehicle position.
- When only a small amount of fuel has been added to the tank.
- When fuel is added while the fuel gauge is already near or at "F".
- When the Toyota Tacoma is stopped on an uneven surface, such as a slope.
- When the vehicle is driven on a slope or through a curve, where fuel movement inside the tank may affect the displayed level.
- Distance to empty
Displays the estimated driving range available with the remaining fuel, helping the driver judge approximately how far the vehicle may continue before refueling is required. - Multi-information display
Provides the driver with a variety of useful Toyota Tacoma vehicle data and operating information.
It also displays warning messages when a malfunction or other condition requiring driver attention is detected. - Odometer and distance until next engine oil change display
Odometer:
Displays the total accumulated distance the vehicle has been driven.
Distance until next engine oil change:
Displays the approximate distance the Toyota Tacoma can be driven before the next engine oil change becomes necessary.
The distance remaining until the next engine oil change will also be displayed under the following conditions:- When the engine switch is turned to ON and the vehicle systems begin operating.
- When a warning message indicates that engine oil maintenance should be performed soon or that the required maintenance interval has been reached.
- When the maintenance information is being reset after the appropriate engine oil service has been completed.
The meters and display illuminate when
The meters and display illuminate when the engine switch is in ON, allowing the driver to view the available vehicle status and driving information.
When the drive mode is changed
The background color of the meter display changes according to the selected driving mode, providing a visual indication of the current Toyota Tacoma drive mode setting.
Customization
The gauges and meters in the Toyota Tacoma can be customized through the available settings in the multi-information display, allowing the driver to adjust supported display preferences according to personal needs.
WARNING
The information display at low temperatures
Allow the interior of the Toyota Tacoma to warm up before relying on the liquid crystal information display. At extremely low temperatures, the display may respond more slowly than usual, and changes in the information shown on the screen may be delayed.
For example, there may be a noticeable delay between the driver's shifting operation and the appearance of the new gear number on the display. Because of this delay, the driver might mistakenly downshift again, which could result in rapid and excessive engine braking and potentially cause an accident resulting in death or serious injury.
NOTICE
To prevent damage to the engine and its components
- Do not allow the tachometer indicator needle to enter the red zone, as this area indicates the maximum engine speed and continued operation in this range may place excessive stress on the engine.
- The engine may be overheating if the engine coolant temperature gauge reaches the red zone (H). If this occurs, immediately stop the Toyota Tacoma in a safe location and inspect the engine only after it has cooled completely.
Adjusting the clock
The clocks shown on the following displays can be adjusted through the multimedia system screen, allowing the displayed time to remain consistent across the vehicle's information systems.
- Multi-information display
- Multimedia system screen
For detailed instructions on clock adjustment and related settings, refer to the "MULTIMEDIA OWNER'S MANUAL".
Clock settings screen
If "Clock:00" is displayed when
is selected on the multi-information display, the system may not be operating correctly and a malfunction may be present.
Have the Toyota Tacoma inspected by your Toyota dealer if this condition occurs.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted to improve visibility under different lighting conditions and according to the driver's preference.
Pressing the button adjusts the brightness level of the instrument panel illumination.
The brightness of the instrument panel lights can be increased or decreased by pressing the button as needed.
Short press: Changes the instrument panel brightness by one level with each press.
Long press: Continuously changes the brightness level until the button is released, making it easier to reach the desired illumination setting.
Instrument cluster brightness adjustment
The Toyota Tacoma instrument cluster brightness levels for conditions when the tail lights are on and when they are off can be adjusted independently, allowing separate illumination settings for different driving environments.
However, when the surrounding environment is bright, such as during daytime driving, turning on the tail lights will not change the instrument cluster brightness. This behavior helps maintain suitable display visibility under bright ambient conditions.
