Toyota Tacoma (N400, 2024-2026) Owner's Manual: 12.3-Inch Digital Gauge Cluster and Meters

The meters provide a variety of useful driving and vehicle information, allowing the driver to monitor important Toyota Tacoma operating conditions at a glance.

Meter display

Locations of gauges and meters

The meter type can be changed through " Settings" on the multi-information display, allowing the available instrument cluster layout to be selected according to the driver's preference.

Type 1/Type 2

The units of measurement shown on the gauges and meters may differ depending on the intended destination and regional specifications of the Toyota Tacoma.

1. Multi-information display
   Provides the driver with a variety of useful vehicle data and operating information.
   It also displays warning messages when a malfunction or another condition requiring driver attention is detected.
2. Outside temperature
   Displays the current outside ambient temperature for convenient reference while driving.
3. Analog meter (Type 2 only)
   The dial type of the analog meter can be changed through " Settings" on the multi-information display, allowing the available analog meter presentation to be selected.
   Tachometer: Displays the engine speed in revolutions per minute, helping the driver monitor current engine operation.
   Analog speedometer: Displays the Toyota Tacoma vehicle speed in an analog format.
4. Digital speedometer
   Displays the current vehicle speed numerically for clear and convenient viewing.
5. Shift position and shift range indicator
   Displays the currently selected shift position or selected shift range so the driver can confirm the transmission operating state.
6. Clock
   Automatically adjusts the displayed time using GPS time information through the GPS clock function. For additional details about clock operation and settings, refer to the "MULTIMEDIA OWNER'S MANUAL".
7. Widget (Audio system-linked display)
   Displays the currently selected audio source or track information directly on the meter for convenient reference.
   While the list of items for the content display area is being shown, the widget will not be displayed.
8. Distance to empty
   Displays the estimated driving range available with the remaining fuel, helping the driver judge approximately how far the Toyota Tacoma may continue before refueling is required.
9. Fuel gauge
   Displays the approximate quantity of fuel remaining in the tank so the driver can monitor the available fuel level.

   In the following situations, the actual quantity of fuel remaining in the tank may not be displayed accurately, and the indicated fuel level may temporarily differ from the actual amount.

   • When only a small amount of fuel is added to the tank.
   • When fuel is added while the fuel gauge is already near or at "F".
   • When the vehicle is stopped on an uneven surface, such as a slope, which may affect the position of the fuel inside the tank.
   • When the Toyota Tacoma is driven on a slope or around a curve, where fuel movement may temporarily influence the displayed level.
10. Engine coolant temperature gauge
    Displays the engine coolant temperature, allowing the driver to monitor the engine's operating temperature.
11. Odometer and distance until next engine oil change display
    Odometer:
    Displays the total accumulated distance the vehicle has been driven.

    Distance until next engine oil change:
    Displays the approximate distance the Toyota Tacoma can be driven before the next engine oil change becomes necessary.

    The distance remaining until the next engine oil change will also be displayed under the following conditions:

    • When the engine switch is turned to ON and the vehicle systems begin operating.
    • When a warning message indicates that engine oil maintenance should be performed soon or that the required maintenance interval has been reached.
    • When the maintenance information is being reset after the appropriate service has been performed.
12. Widget (Fuel Economy)
    Displays fuel economy information to help the driver monitor vehicle efficiency during operation.
    While the list of items for the content display area is being shown, the widget will not be displayed.

Type 3

1. Tachometer
   Displays the engine speed in revolutions per minute, providing the driver with a clear indication of current engine operation.
2. Multi-information display
   Provides the driver with a variety of Toyota Tacoma vehicle data and operating information.

   It also displays warning messages if a malfunction or another condition requiring attention is detected.

3. Outside temperature
   Displays the current outside ambient temperature for convenient reference.
4. Digital speedometer
   Displays the current vehicle speed numerically for quick and accurate viewing.
5. Shift position and shift range indicator
   Displays the selected shift position or selected shift range so the driver can confirm the current transmission setting.
6. Clock
   Automatically adjusts the displayed time using GPS time information through the GPS clock function. For details about the clock and related settings, refer to the "MULTIMEDIA OWNER'S MANUAL".
7. Analog speedometer
   Displays the Toyota Tacoma vehicle speed using an analog-style meter.
8. Distance to empty
   Displays the estimated driving range available with the remaining fuel, providing a useful reference for planning when to refuel.
9. Fuel gauge
   Displays the approximate quantity of fuel remaining in the tank, allowing the driver to monitor the available fuel level during normal Toyota Tacoma operation.

   In the following situations, the actual quantity of fuel remaining in the tank may not be displayed accurately, and the indicated fuel level may temporarily differ from the actual amount remaining.

   • When only a small amount of fuel is added to the tank.
   • When fuel is added while the fuel gauge is already near or at "F".
   • When the Toyota Tacoma is stopped on an uneven surface, such as a slope, which can affect the position of the fuel inside the tank.
   • When the vehicle is driven on a slope or around a curve, where movement of the fuel may temporarily influence the displayed level.
10. Engine coolant temperature gauge
    Displays the engine coolant temperature, allowing the driver to monitor the engine's current operating temperature.
11. Odometer and distance until next engine oil change display Odometer:
    Displays the total accumulated distance the Toyota Tacoma has been driven.
    Distance until next engine oil change:
    Displays the approximate distance the vehicle can be driven before the next engine oil change becomes necessary.
    The distance remaining until the next engine oil change will also be displayed in the following situations:
    • When the engine switch is turned to ON and the vehicle systems begin operating.
    • When a warning message indicates that engine oil maintenance should be performed soon or that the required maintenance interval has been reached.
    • When the maintenance information is being reset after the appropriate engine oil service has been completed.

 The meters and display illuminate when

The meters and display illuminate when the engine switch is in ON, allowing the driver to view the available Toyota Tacoma vehicle status and driving information.

 When the drive mode is changed

The background color of the meter display changes according to the selected driving mode, providing a visual indication of the current drive mode setting.

 If the units of measure for speedometer can be changed

If the speedometer measurement units can be changed, the corresponding alternate units of measure are also displayed as shown in the illustrations, helping the driver interpret vehicle speed information correctly.

1. Type 1/Type 2 meter display configuration
2. Type 3 meter display configuration

 Outside temperature display

• Displays the outside temperature within the range of -40ºF (-40ºC) to 140ºF (60ºC), providing the Toyota Tacoma driver with a convenient indication of current ambient temperature.
• When the outside temperature is approximately 37ºF (3ºC) or lower, the indicator will flash for approximately 10 seconds and then remain illuminated.
• In the following situations, the correct outside temperature may not be displayed immediately, or the displayed value may take longer than normal to change:
  • When the vehicle is stopped or being driven at low speeds of less than 20 mph (12 km/h).
  • When the outside temperature changes suddenly, such as when entering or leaving a garage, tunnel, or similar enclosed area.
• When "--" or "E" is displayed, the outside temperature display system may be malfunctioning.

  Take your Toyota Tacoma to your Toyota dealer for inspection if this condition occurs.

 Fuel gauge and driving range display

The fuel gauge and driving range display operate together. If the fuel gauge and estimated driving range do not update after only a small amount of fuel has been added, the displays can be refreshed by performing the following procedure carefully and in the stated order:

1. Stop the Toyota Tacoma on a level surface so the fuel inside the tank can settle evenly.

Wait until the fuel in the fuel tank stabilizes before continuing with the procedure.

2. Turn the engine switch off.

3. While pressing and holding of the meter control switch, turn the engine switch to ON.

4. Continue holding of the meter control switch for approximately 5 seconds.

Release the button when the odometer begins blinking, which indicates that the update procedure has started.

The update is complete when the odometer continues blinking for approximately 5 seconds and then returns to its normal display. The fuel gauge and driving range information should then resume normal operation.

 Distance to empty

• This distance is calculated based on the vehicle's average fuel consumption and is intended to provide an estimated remaining driving range.

  As a result, the actual distance the Toyota Tacoma can be driven may differ from the value shown on the display depending on driving conditions and fuel consumption.

• When only a small amount of fuel is added to the tank, the displayed distance to empty may not update immediately. When refueling, turn the engine switch off. If the Toyota Tacoma is refueled without turning the engine switch off, the displayed value may not be updated correctly.
• When "Refuel" is displayed, the remaining fuel level is low and the system can no longer calculate the distance that can be driven with the available fuel. Refuel the vehicle immediately.

Customization

The gauges and meters can be customized through " Settings" on the multi-information display, allowing supported meter and display preferences to be adjusted.

WARNING

The information display at low temperatures

Allow the interior of the Toyota Tacoma to warm up before relying on the liquid crystal information display. At extremely low temperatures, the information display monitor may respond more slowly than normal, and changes shown on the display may be delayed.

For example, there may be a delay between the driver's shifting operation and the new gear number appearing on the display. This delay could cause the driver to downshift again unintentionally, resulting in rapid and excessive engine braking and possibly causing an accident that could lead to death or serious injury.

NOTICE

To prevent damage to the engine and its components

• Do not allow the tachometer indicator needle to enter the red zone, as this area indicates the maximum engine speed and operation in this range may place excessive stress on the engine.
• The engine may be overheating if the engine coolant temperature gauge reaches the red zone (H). If this occurs, immediately stop the Toyota Tacoma in a safe location and inspect the engine only after it has cooled completely.

Adjusting the clock

The clocks shown on the following displays can be adjusted through the multimedia system screen, allowing the displayed time to remain consistent across the vehicle's information systems.

• Multi-information display
• Multimedia system screen

For detailed information about clock adjustment and related settings, refer to the "MULTIMEDIA OWNER'S MANUAL".

Clock settings screen

If "Clock:00" is displayed when " Settings" is selected on the multi-information display, the system may not be operating correctly and a malfunction may be present.

Have the Toyota Tacoma inspected by an authorized repairer or another reliable repairer if this condition occurs.

Adjusting the instrument panel light control

The brightness of the instrument panel lights can be adjusted to provide suitable visibility under different lighting conditions.

Pressing the button adjusts the brightness level of the instrument panel illumination.

The brightness of the instrument panel lights can be increased or decreased by pressing the button according to the driver's preference.

Short press: Changes the brightness level by one step with each press.

Long press: Continuously changes the brightness level until the button is released, making it easier to reach the desired illumination setting.

Instrument cluster brightness adjustment

The Toyota Tacoma instrument cluster brightness levels for conditions when the tail lights are on and when they are off can be adjusted individually, allowing separate illumination settings for different driving environments.

However, when the surroundings are bright, such as during daytime driving, turning on the tail lights will not change the instrument cluster brightness. This behavior helps maintain suitable display visibility under bright ambient conditions.