DESCRIPTION
If the forward recognition camera detects a malfunction in the camera heater (forward recognition hood) circuit, it will output a malfunction signal to the millimeter wave radar sensor assembly via CAN communication and DTC C1AAE will be stored.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
C1AAE |
Heater Circuit |
When the ignition switch is ON, the millimeter wave radar sensor assembly receives a camera heater (forward recognition hood) circuit malfunction signal from the forward recognition camera continuously for 5 seconds or more. |
Forward recognition camera system |
PROCEDURE
1. |
GO TO FORWARD RECOGNITION CAMERA SYSTEM |
HINT:
If DTC C1AAE is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.
Click here
NEXT |
END |
Blind Spot Monitor Main Switch
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL
(See page )
2. REMOVE BLIND SPOT MONITOR MAIN SWITCH (WARNING CANCELING SWITCH ASSEMBLY)
(a) Disengage the 2 claws to remove the blind spot monitor main switch ...
4WD Control ECU Communication Stop Mode
DESCRIPTION
Detection Item
Symptom
Trouble Area
4WD Control ECU Communication Stop Mode
Either condition is met:
Communication stop for "Four Wheel Drive Control" is indicated
on the "Communication Bus C ...
System Description
SYSTEM DESCRIPTION
1. FRONT PASSENGER OCCUPANT CLASSIFICATION SYSTEM
(a) General Description
(1) The front passenger occupant detection ECU determines whether the front passenger
seat is occupied by an adult or child (with child seat) or is unoccupied, based
on the load that is applied to the ...