DIAGNOSTIC TROUBLE CODE CHART
Blind Spot Monitor System
DTC Code |
Detection Item |
See page |
---|---|---|
C1A45 |
Vehicle Speed Sensor |
|
C1A47 |
Steering Angle Sensor |
|
C1AB0 |
Short to +B in Outer Mirror Indicator(Master) |
|
C1AB1 |
Short to +B in Outer Mirror Indicator(Slave) |
|
C1AB2 |
Short to GND in Outer Mirror Indicator(Master) |
|
C1AB3 |
Short to GND in Outer Mirror Indicator(Slave) |
|
C1AB4 |
Open in Outer Mirror Indicator(Master) |
|
C1AB5 |
Open in Outer Mirror Indicator(Slave) |
|
C1AB6 |
Blind Spot Monitor Master Module |
|
C1AB7 |
Blind Spot Monitor Slave Module |
|
C1AB8 |
Destination Information Undefined |
|
C1ABB* |
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
|
C1ABC* |
Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete |
|
C1ABD |
Short to +B in Buzzer |
|
C1ABE |
Short to GND or Open in Buzzer |
|
C1AC1 |
Master Module Horizontal Axis Misalignment |
|
C1AC2 |
Slave Module Horizontal Axis Misalignment |
|
U0100 |
Lost Communication with ECM / PCM "A" |
|
U0126 |
Lost Communication with Steering Angle Sensor Module |
|
U0129 |
Lost Communication with Brake System Control Module |
|
U0142 |
Lost Communication with Body Control Module "B" |
|
U0232 |
Lost Communication with Blind Spot Monitor Slave Module |
|
U1331 |
Software Incompatibility with Body Control Module "B" |
|
HINT:
*: Stored when a blind spot monitor sensor is replaced.
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE CONSOLE COMPARTMENT DOOR CUSHION
HINT:
Use the same procedure as for the opposite side.
(a) Disengage the claw to remove the console compartment door cushion.
2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
...
Registration
REGISTRATION
PROCEDURE
1. DESCRIPTION OF CODE REGISTRATION
HINT:
Registering an ID code enables the entry and start function, wireless
door lock control function and engine immobiliser function to be operated.
Code registration is needed when the certification ECU (smart key E ...
Downhill Assist Control system
The downhill assist control system helps to prevent excessive speed on steep
downhill descents.
■ System operation
The system will operate when the vehicle is traveling under 15 mph (25 km/h)
and the front-wheel drive control switch is in the L4 position.
Press the DAC switch. The ind ...