Toyota Tacoma (2015-2018) Service Manual: Removal

Toyota Tacoma (2015-2018) Service Manual / 2gr-fks Engine Control / Camshaft Oil Control Valve(for Intake Side Of Bank 1) / Removal

REMOVAL

CAUTION / NOTICE / HINT

NOTICE:

If one of the camshaft timing gear bolts is already removed, do not remove any other camshaft timing gear bolts.

PROCEDURE

1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package)

2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

3. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

(See page 4. SET NO. 1 CYLINDER TO TDC/COMPRESSION )

4. SET NO. 1 CYLINDER TO TDC/COMPRESSION

(a) Turn the crankshaft clockwise to align the timing mark (cutout) on the crankshaft pulley assembly with the "0" timing mark on the timing chain cover assembly.

Text in Illustration

*a	"0" Timing Mark
*b	Timing Mark (Cutout)

(b) Check that the protrusion on the inside of the camshaft timing gear assembly is at the top.

Text in Illustration

*a	Protrusion

HINT:

If the protrusion is not at the top, rotate the crankshaft clockwise 360° and align the timing marks again.

5. REMOVE CAMSHAFT TIMING GEAR BOLT

(a) Using SST, hold the crankshaft pulley assembly.

SST: 09213-54015

91651-60855

SST: 09330-00021

(b) Remove the camshaft timing gear bolt.

NOTICE:

Replace with a new part if it is dropped or if it receives a strong impact.

On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING GEAR BOLT (a) Remove the camshaft timing oil control solenoid assembly (See page ). (b) Check that the plunger strokes when ...

Installation

INSTALLATION PROCEDURE 1. SET NO. 1 CYLINDER TO TDC/COMPRESSION 2. INSTALL CAMSHAFT TIMING GEAR BOLT NOTICE: There are different types of camshaft timing gear bolts. Make sure to check the i ...

Other materials:

Theft Deterrent System Unexpectedly Sets Itself
DESCRIPTION A situation in which the theft deterrent system unexpectedly sets itself can be caused when the main body ECU (multiplex network body ECU) cannot detect whether a door is open or closed. If the theft deterrent system unexpectedly sets itself, there may be a malfunction in a court ...

PTC Heater Circuit
DESCRIPTION PTC HTR heater relays are closed in accordance with signals from the air conditioning amplifier assembly and power is supplied to the quick heater assembly installed on the radiator heater unit. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits rela ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each sy ...