Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR CROSS TRAFFIC ALERT BUZZER
(a) Engage the clamp to install the rear cross traffic alert buzzer.
(b) Connect the connector.
2. INSTALL QUARTER INSIDE TRIM BOARD LH (for Double Cab)
(See page )
3. INSTALL QUARTER INSIDE TRIM BOARD LH (for Access Cab)
(See page )
Removal
REMOVAL
PROCEDURE
1. REMOVE QUARTER INSIDE TRIM BOARD LH (for Double Cab)
(See page )
2. REMOVE QUARTER INSIDE TRIM BOARD LH (for Access Cab)
(See page )
3. REMOVE REAR CROSS TRAFFIC ALERT BUZZER
(a) Disconnect the connector. |
|
(b) Disengage the clamp to remove the rear cross traffic alert buzzer.
Reassembly
REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
Perform "Inspection After Repairs" after replacing the cylinder head sub-assembly
or cylinder head LH (See page ).
PROCEDURE
1. INSTALL SPARK PLUG TUBE
NOTICE:
When using a new cylinder head, the spark plug tubes must be replaced.
...
Installation
INSTALLATION
PROCEDURE
1. INSTALL HYDRAULIC BRAKE BOOSTER
(a) Install a new brake booster gasket onto the hydraulic brake booster.
(b) Install the hydraulic brake booster with the 4 nuts.
Torque:
14 N·m {145 kgf·cm, 10 ft·lbf}
(c) Using a union nut wrench, connect the 4 brake l ...
Off-road precautions (4WD models and PreRunner)
This vehicle has higher ground clearance and narrower tread in relation to
the height of its center of gravity to make it capable of performing in a wide variety
of off-road applications.
Off-road vehicle feature
● Specific design characteristics give it a higher center of gravity than o ...