PROBLEM SYMPTOMS TABLE
HINT:
Symptom |
Suspected Area |
See page |
---|---|---|
When the shift lever is in R, the rear view monitor image is not displayed. |
Proceed to "Reverse Signal Circuit" |
|
Proceed to "Radio Receiver Power Source Circuit"*1 |
|
|
Proceed to "Radio Receiver Power Source Circuit"*2 |
|
|
Radio and Display Receiver Assembly*1 |
|
|
Navigation Receiver Assembly*2 |
|
|
When the shift lever is in R, the rear view monitor image is not displayed (screen is blue for 3 seconds and then turns off). |
Proceed to "Image from Camera for Rear View Monitor is Abnormal" |
|
Radio and Display Receiver Assembly*1 |
|
|
Navigation Receiver Assembly*2 |
|
|
When the shift lever is not in R, the rear view monitor image is displayed. |
Proceed to "Reverse Signal Circuit" |
|
Radio and Display Receiver Assembly*1 |
|
|
Navigation Receiver Assembly*2 |
|
|
Image from the camera for the rear view monitor is abnormal (color, distorted picture). |
Proceed to "Image from Camera for Rear View Monitor is Abnormal" |
|
Radio and Display Receiver Assembly*1 |
|
|
Navigation Receiver Assembly*2 |
|
HINT:
When the amber LED light is illuminated on the radio and display receiver assembly*1 or navigation receiver assembly*2 with the ignition switch ON and the shift lever position R, this indicates that the monitor image has been canceled manually. Check if the image will be displayed by pressing the AUTO button.
Initialization
INITIALIZATION
1. INITIALIZE POWER WINDOW CONTROL SYSTEM
NOTICE:
When a door window regulator assembly, power window regulator motor
assembly, door glass or door glass run is reinstalled or replaced, the power
window control system must be initialized. Functions such as the auto u ...
Listening to an iPod
Connecting an iPod enables you to enjoy music from the vehicle speakers.
Select “iPod” on the “Select Audio Source” screen.
When the iPod connected to the system includes iPod video, the system can only
output the sound by selecting the browse screen.
Connecting an iPod
Audio control s ...
Driver Side Door Entry Lock and Unlock Functions do not Operate
DESCRIPTION
If the entry lock and unlock functions do not operate for the driver door only,
the request code may not be being transmitted from the driver door or the front
door outside handle assembly LH (touch sensor) may be malfunctioning. If the entry
functions for other doors operate prop ...