Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Inspection

Toyota Tacoma (2015-2018) Service Manual / Air Conditioning / Room Temperature Sensor / Inspection

INSPECTION

PROCEDURE

1. INSPECT COOLER (ROOM TEMPERATURE. SENSOR) THERMISTOR

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a

Component without harness connected

(cooler thermistor (room temperature sensor))

*b

Sensing Portion

*c

Resistance (kΩ)

*d

Temperature (°C (°F))

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

1 - 2

10°C (50°F)

3.00 to 3.73 kΩ

15°C (59°F)

2.45 to 2.88 kΩ

20°C (68°F)

1.95 to 2.30 kΩ

25°C (77°F)

1.60 to 1.80 kΩ

30°C (86°F)

1.28 to 1.47 kΩ

35°C (95°F)

1.00 to 1.22 kΩ

40°C (104°F)

0.80 to 1.00 kΩ

45°C (113°F)

0.65 to 0.85 kΩ

50°C (122°F)

0.50 to 0.70 kΩ

55°C (131°F)

0.44 to 0.60 kΩ

60°C (140°F)

0.36 to 0.50 kΩ

NOTICE:

  • Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.
  • When measuring, the sensor temperature must be the same as the ambient temperature.

If the result is not as specified, replace the cooler thermistor (room temperature sensor).
Components
COMPONENTS ILLUSTRATION ...

Removal
REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) 2. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab) 3. REMOVE COWL SIDE TRIM BOARD LH 4. REMOVE CENTER INSTRUME ...

Other materials:

If the shift lever cannot be shifted from P (vehicles with an automatic transmission)
If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measur ...

Rear differential lock system
The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or rugged surface. The rear differential lock system is effective in case one of the rear wheels is spinning. Press the RR DIFF LOCK switch to lock the rear differential. At thi ...

TC and CG Terminal Circuit
DESCRIPTION Tire pressure warning system DTCs can be checked by connecting terminals 13 (TC) and 4 (CG) of the DLC3. The DTCs are indicated by blinking the tire pressure warning light. WIRING DIAGRAM PROCEDURE 1. CHECK CAN COMMUNICATION SYSTEM (a) Check for ...

© 2011-2024 Copyright www.ttguide.net