Toyota Tacoma (2015-2018) Service Manual: Data List / Active Test

Toyota Tacoma (2015-2018) Service Manual / Supplemental Restraint Systems / Occupant Classification System / Data List / Active Test

DATA LIST / ACTIVE TEST

HINT:

By accessing the Data List displayed by the Techstream, you can check values of switches and sensors without removing any parts. Reading the Data List as the first step of troubleshooting is one method to shorten diagnostic time.

1. DATA LIST FOR OCCUPANT DETECTION ECU

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to the on position.

Occupant Detection:

Tester Display	Test Part	Control Range	Diagnostic Note
IG Switch	Ignition switch condition/ ON: Ignition switch ON OFF: Ignition switch OFF	ON/OFF	-
Passenger Buckle SW	Buckle switch (Passenger side)/ Unset: Unfasten the passenger side seat belt Set: Fasten the passenger side seat belt NG: Passenger side seat belt has trouble	Unset/Set	-
Passenger Classification	Passenger classification/ AM50: Adult more than 54 kg (119.05 lb) is seated AF05: Adult (36 to 54 kg (79.37 to 119.05 lb)) is seated CHILD: Child (less than 36 kg (79.37 lb)) is seated CRS: Child restraint system (less than 7 kg (15.43 lb)) and passenger side buckle switch is ON, then 7 to 36 kg (15.43 to 79.37 lb) is set OFF: Vacant	AM50/AF05/CHILD/CRS/OFF	-
Sensor Range Info	Sensor range information/ OK: The value of a sensor is within the range NG: The value of a sensor is over the range	OK	-
FL Sensor Range Info	Front left sensor range information/ OK: Sensor range is -17 to 27 kg (-37.48 to 59.52 lb) Min.: Less than -17 kg (-37.48 lb) Max.: More than 27 kg (59.52 lb)	OK	-
FR Sensor Range Info	Front right sensor range information/ OK: Sensor range is -17 to 27 kg (-37.48 to 59.52 lb) Min.: Less than -17 kg (-37.48 lb) Max.: More than 27 kg (59.52 lb)	OK	-
RL Sensor Range Info	Rear left sensor range information/ OK: Sensor range is -17 to 37 kg (-37.48 to 81.57 lb) Min.: Less than -17 kg (-37.48 lb) Max.: More than 37 kg (81.57 lb)	OK	-
RR Sensor Range Info	Rear right sensor range information/ OK: Sensor range is -17 to 37 kg (-37.48 to 81.57 lb) Min.: Less than -17 kg (-37.48 lb) Max.: More than 37 kg (81.57 lb)	OK	-
FL Sensor Voltage	Front left sensor voltage/ Min.: 0 V Max.: 19.8 V	0 to 4.7 V	-
FR Sensor Voltage	Front right sensor voltage/ Min.: 0 V Max.: 19.8 V	0 to 4.7 V	-
RL Sensor Voltage	Rear left sensor voltage/ Min.: 0 V Max.: 19.8 V	0 to 4.7 V	-
RR Sensor Voltage	Rear right sensor voltage/ Min.: 0 V Max.: 19.8 V	0 to 4.7 V	-
FL Sensor Weight Info	Front left sensor weight information/ Min.: -17 kg (-37.48 lb) Max.: 27 kg (59.52 lb)	-17 to 27 kg (-37.48 to 59.52 lb)	-
FR Sensor Weight Info	Front right sensor weight information/ Min.: -17 kg (-37.48 lb) Max.: 27 kg (59.52 lb)	-17 to 27 kg (-37.48 to 59.52 lb)	-
RL Sensor Weight Info	Rear left sensor weight information/ Min.: -17 kg (-37.48 lb) Max.: 37 kg (81.57 lb)	-17 to 37 kg (-37.48 to 81.57 lb)	-
RR Sensor Weight Info	Rear right sensor weight information/ Min.: -17 kg (-37.48 lb) Max.: 37 kg (81.57 lb)	-17 to 37 kg (-37.48 to 81.57 lb)	-
Total Weight Information	Total weight information/ Min.: -68 kg (-149.91 lb) Max.: 128 kg (282.19 lb)	-68 to 128 kg (-149.91 to 282.19 lb)	-
Number of Present DTC	Number of DTC recorded/ Min.: 0, Max.: 255	0	-
Number of Past DTC	Number of present trouble codes/ Min.: 0, Max.: 255	0	-

Sleep Operation Failure of Occupant Classification ECU (B1796)

DESCRIPTION During sleep mode, the occupant detection ECU monitors the condition of each sensor while the ignition switch is off. In this mode, if the occupant detection ECU detects an internal m ...

Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART If a trouble code is displayed during the DTC check, check the circuit listed for the code in the table below (proceed to the page listed for that circuit). 1. Occupa ...

Other materials:

Wheels
If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, di ...

Steering Pad Switch Circuit
DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the radio and display receiver assembly. If there is an open in the circuit, the audio system cannot be operated using the steering pad switch assembly. If there is a short in the circuit, the same con ...

Clutch Switch Circuit
DESCRIPTION While depressing the clutch pedal, the clutch start switch assembly sends a signal to terminal MTN of the 4 wheel drive control ECU. While the signal is input, switching between H4 and L4 is possible. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING TECHSTREA ...