Toyota Tacoma (2015-2018) Service Manual: Customize Parameters
CUSTOMIZE PARAMETERS
1. LANE DEPARTURE ALERT SYSTEM
Click here 
2. INTUITIVE PARKING ASSIST SYSTEM
Click here
3. PRE-COLLISION SYSTEM
Click here
4. SEAT BELT WARNING SYSTEM
Click here
5. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
Click here
6. THEFT DETERRENT SYSTEM
Click here
7. LIGHTING SYSTEM
Click here
8. POWER DOOR LOCK CONTROL SYSTEM
Click here
9. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System)
Click here
10. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)
Click here
11. SMART KEY SYSTEM (for Entry Function)
Click here
12. KEY REMINDER WARNING SYSTEM
Click here
13. METER / GAUGE SYSTEM
Click here
14. POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function)
Click here
15. SLIDING ROOF SYSTEM
Click here
Vehicle Lift And Support Locations
VEHICLE LIFT AND SUPPORT LOCATIONS
1. NOTICE ABOUT VEHICLE CONDITION WHEN JACKING UP VEHICLE
(a) The vehicle must be unloaded before jacking up / lifting up the vehicle.
Never jack up / lift up a ...
Initialization
INITIALIZATION
1. PROCEDURES NECESSARY WHEN BATTERY TEMINAL IS DISCONNECTED/RECONNECTED
Necessary Procedure
Effect/Inoperative Function when Necessary Procedures are not Perfor ...
Other materials:
Steering Angle Sensor (C1A47)
DESCRIPTION
The blind spot monitor sensor receives steering angle signals from the spiral
cable with sensor sub-assembly via CAN communication.
DTC Code
DTC Detection Condition
Trouble Area
C1A47
A fail flag is transmitted from the ste ...
Fail-safe Chart
FAIL-SAFE CHART
If there is a problem with sensor signals or actuator systems, the skid
control ECU prohibits power supply to the brake actuator assembly and informs
the ECM of a VSC system malfunction.
The brake actuator assembly turns off the solenoids and the ECM stops
its ...
Removal
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting
the cable from the negative (-) battery terminal. Therefore, make sure to read the
disconnecting the cable from the negative (-) battery terminal notices before pr ...
