COMPONENTS
ILLUSTRATION
*1 |
CHARCOAL CANISTER ASSEMBLY |
*2 |
CHARCOAL CANISTER FUEL HOSE |
*3 |
CHARCOAL CANISTER LEAK DETECTION PUMP SUB-ASSEMBLY |
*4 |
FUEL TANK VENT HOSE |
*5 |
FUEL TANK VENT HOSE SUB-ASSEMBLY |
*6 |
WIRE HARNESS BRACKET |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
Front Crankshaft Oil Seal
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL
(a) Apply MP grease to the lip of a new timing gear case or timing chain case
oil seal.
(b) Using SST and a hammer, tap in the timing gear case ...
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FLUID LEVEL IN RESERVOIR
(a) Check the fluid level.
If the brake fluid level is lower than the MIN line, check for leaks and inspect
the disc brake pads. If necessary, refill the reservoir with brake fluid to the
MAX line after repair or replaceme ...
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE FRONT OIL PUMP BODY O-RING
(a) Remove the front oil pump body O-ring from the oil pump assembly.
2. SECURE OIL PUMP ASSEMBLY
(a) Place the oil pump assembly on the torque converter assembly.
...