Toyota Tacoma (2015-2018) Service Manual: Components

Brake Actuator

...

On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT TECHSTREAM (a) Warm up the engine. (b) Turn the ignition switch to off. (c) Connect the Techstream to the DLC3. (d) Turn the ignition switch to ON. (e ...

Other materials:

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: The following procedures are for BD22 (w/o Differential Lock). PROCEDURE 1. INSTALL DIFFERENTIAL CARRIER ASSEMBLY REAR (a) Clean the contact surfaces of the rear differential carrier assembly and axle housing. (b) Install the rear differential carr ...

Dtc Check / Clear
DTC CHECK / CLEAR 1. DTC CHECK / CLEAR (when Using Techstream) (a) Check for DTCs. (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Enter the following menus: Chassis / ABS/VSC/ TRAC / Trouble Codes. (5) Read the DTCs by following the ...

Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 2. REMOVE FRONT EXHAUST PIPE ASSEMBLY (See page ) 3. REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE NOTICE: When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent ...