COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (AIR CONDITIONING CONTROL ASSEMBLY)
(for Automatic Air Conditioning System)
(a) Connect the connectors.
(b) Engage the 8 clips to hazard warning signal switch assembly (air conditioning
control assembly).
2. INSTALL HAZ ...
Vehicle Position Mark Deviates Greatly
CAUTION / NOTICE / HINT
NOTICE:
If standard size tires are not installed, the vehicle position mark
may deviate from the route even if the navigation system is operating normally.
Make sure that standard size tires are installed to the vehicle before
inspection.
PROCE ...
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Check the details of the DTC(s) (See page
).
2. CLEAR DTC
(a) Connec ...