Toyota Tacoma (2015-2018) Service Manual: Black Screen

Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / Black Screen

PROCEDURE

1.	CHECK DISPLAY SETTING

(a) Check that the display is not in "Screen Off" mode.

OK:

The display setting is not in "Screen Off" mode.

CHANGE SCREEN TO SCREEN ON MODE

2.	CHECK IMAGE QUALITY SETTING

(a) Check that the screen color quality can be set.

OK:

Setting is possible.

SET SCREEN COLOR QUALITY TO NORMAL

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

USB Audio System Recognition/Play Error

DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be ...

Steering Pad Switch Circuit

DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the navigation receiver assembly. If there is an open in the circuit, the audio system cannot be operate ...

Other materials:

Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page ). If the side airbag was deployed, replace the front seat assembly with ...

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the pre-collision system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

Air Conditioning Compressor Magnetic Clutch Circuit
DESCRIPTION When the air conditioning amplifier assembly is turned on, a magnetic clutch on signal is sent from the MGC terminal of the air conditioning amplifier assembly. Then, the MG CLT relay turns on to operate the magnetic clutch assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NO ...