TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Other System / Wireless Charging System / Wireless Charger Illumination Circuit

Toyota Tacoma (2015-2018) Service Manual: Wireless Charger Illumination Circuit

DESCRIPTION

When the light control switch is turned to the tail or head position, this circuit sends an illumination signal to the mobile wireless charger cradle assembly. Based on this signal, the mobile wireless charger cradle assembly dims the indicator lights (green and amber).

WIRING DIAGRAM

CAUTION / NOTICE / HINT

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1.

CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)

(a) Disconnect the M5 mobile wireless charger cradle assembly connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Switch Condition

Specified Condition

M5-9 (TAIL) - Body ground

Light control switch in tail or head position

11 to 14 V
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
    Related Tacoma materials

    Removal
    REMOVAL PROCEDURE 1. REMOVE REAR SEAT CUSHION ASSEMBLY (a) Remove the 2 bolts and rear seat cushion assembly. 2. REMOVE REAR SEATBACK HINGE COVER (a) Disengage the 6 claws to remove the 2 rear seatback hinge covers. ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY (a) Connect the actuator hose and connector. (b) Install the No. 1 mounting support with the 3 bolts. Torque: 186 N·m {1899 kgf·cm, 138 ft·lbf} (c) Install the No. 2 mounting support with the 2 bolts. Torque: 160 N ...

    How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the key reminder warning system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...