■ Instrument cluster

■ Center panel

■Warning lights

*1: Slip indicator comes on.
*2: The indicator flashes to indicate a malfunction.
GAS STATION INFORMATION


Camper information
This information has been prepared in accordance with regulation issued by
the National Highway Traffic Safety Administration of the U.S. Department of Transportation.
It provides the purchasers a ...
Related Tacoma materials
Vehicle Stuck: Recovery Procedures
If the Toyota Tacoma becomes stuck in mud, loose dirt, sand, or snow and the drive wheels begin spinning without moving the vehicle, use the following recovery procedure carefully to regain traction.
Recovering procedure
1. Stop the engine, apply the parking brake securely, and move the shift lever ...
Invalid Data Received from Vehicle Dynamics Control Module (U0416)
DESCRIPTION
This DTC is detected if a wheel speed malfunction signal is sent from the skid
control ECU (brake actuator assembly).
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
U0416
Invalid Data Received From V ...
Open in One Side of Bus 5 Branch Line
DESCRIPTION
When the CAN bus main lines are normal (no open, short to ground, short to +B
or short between lines) and there is an ECU or sensor on the "Communication Bus
Check" screen that is indicated as not communicating or whose connection status
on the "Communication Bus Ch ...