TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Engine Immobiliser / Transponder Key Amplifier

Toyota Tacoma (2015-2018) Service Manual: Transponder Key Amplifier

Components

COMPONENTS

ILLUSTRATION

Installation

Installation

INSTALLATION

PROCEDURE

1. INSTALL TRANSPONDER KEY COIL

(a) Engage the 2 claws to install the transponder key coil.

(b) Connect the connector.

2. INSTALL UPPER STEERING COLUMN COVER

(See page ) ) )

3. INSTALL LOWER STEERING COLUMN COVER

(See page ) ) )

Removal

REMOVAL

PROCEDURE

1. REMOVE LOWER STEERING COLUMN COVER

(See page ) ) )

2. REMOVE UPPER STEERING COLUMN COVER

(See page ) ) )

3. REMOVE TRANSPONDER KEY COIL

(a) Disconnect the connector.

(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the transponder key coil.

Text in Illustration

*a

Protective Tape
    Related Tacoma materials

    Steering Pad Switch Circuit
    DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the radio and display receiver assembly. If there is an open in the circuit, the audio system cannot be operated using the steering pad switch assembly. If there is a short in the circuit, the same con ...

    Occupant Classification ECU Malfunction (B1795)
    DESCRIPTION DTC B1795 is set when a malfunction is detected in the occupant detection ECU. Troubleshoot DTC B1771 first when both DTCs B1771 and B1795 are present. DTC No. DTC Detections Conditions Trouble Areas B1795 Occupant detection ...

    Customize Parameters
    CUSTOMIZE PARAMETERS 1. CUSTOMIZE FUNCTION WITH TECHSTREAM NOTICE: Be sure to record the current settings before customizing. These buzzers should be ON for safe driving. Perform these procedure only if it is necessary to turn the buzzer OFF (disabled). HINT: The following ...