TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Tire And Wheel / Tire Pressure Warning Receiver

Toyota Tacoma (2015-2018) Service Manual: Tire Pressure Warning Receiver

Components

COMPONENTS

ILLUSTRATION

Removal

Removal

REMOVAL

PROCEDURE

1. SEPARATE ROOF HEADLINING ASSEMBLY (for Double Cab)

(See page 2. SEPARATE ROOF HEADLINING ASSEMBLY (for Access Cab) 2. SEPARATE ROOF HEADLINING ASSEMBLY (for Access Cab) )

2. SEPARATE ROOF HEADLINING ASSEMBLY (for Access Cab)

(See page 3. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER 3. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER )

3. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

(a) Disconnect the connector.

(a) Disconnect the connector.

(b) Remove the bolt and the tire pressure warning ECU and receiver.

Installation

INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

(a) Install the tire pressure warning ECU and receiver with the nut.

(b) Connect the connector.

2. INSTALL ROOF HEADLINING ASSEMBLY (for Double Cab)

(See page 3. INSTALL ROOF HEADLINING ASSEMBLY (for Access Cab) 3. INSTALL ROOF HEADLINING ASSEMBLY (for Access Cab) )

3. INSTALL ROOF HEADLINING ASSEMBLY (for Access Cab)

(See page 4. REGISTRATION TRANSMITTER ID 4. REGISTRATION TRANSMITTER ID )

4. REGISTRATION TRANSMITTER ID

(See page 5. PERFORM INITIALIZATION )

5. PERFORM INITIALIZATION

(See page Tire Pressure Warning System )

    Related Tacoma materials

    ACC Signal Circuit
    DESCRIPTION This circuit detects whether the ignition switch is ACC or off, and sends this information to the main body ECU (multiplex network body ECU). WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the fo ...

    Data List / Active Test
    DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or sig ...

    VSC Buzzer Circuit
    DESCRIPTION The skid control ECU (brake actuator assembly) is connected to the combination meter via CAN communication. The combination meter has a built-in VSC warning buzzer: Sounds intermittently to inform the driver if the temperature of brake actuator assembly has increased exce ...