TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Park Assist / Monitoring / Television Camera

Toyota Tacoma (2015-2018) Service Manual: Television Camera

Components

COMPONENTS

ILLUSTRATION

Installation

Installation

INSTALLATION

PROCEDURE

1. INSTALL REAR TELEVISION CAMERA ASSEMBLY

(a) Install the rear television camera assembly with the 2 bolts.

Torque:

5.5 N·m {56 kgf·cm, 49 in·lbf}

(b) Connect the connector.

2. INSTALL TAIL GATE SERVICE HOLE COVER

(See page 3. INSTALL TAIL GATE PROTECTOR )

3. INSTALL TAIL GATE PROTECTOR

(See page Removal )

Removal

REMOVAL

PROCEDURE

1. REMOVE TAIL GATE PROTECTOR

(See page 2. REMOVE TAIL GATE SERVICE HOLE COVER )

2. REMOVE TAIL GATE SERVICE HOLE COVER

(See page 3. REMOVE REAR TELEVISION CAMERA ASSEMBLY )

3. REMOVE REAR TELEVISION CAMERA ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 2 bolts and rear television camera assembly.

    Related Tacoma materials

    Dtc Check / Clear
    DTC CHECK / CLEAR HINT: When using the Techstream with the engine switch off to troubleshoot: Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins. Refer to the T ...

    Terminals Of Ecu
    TERMINALS OF ECU 1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Disconnect the 1D and 1F driver side junction block connectors. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connectors ...

    Precaution
    PRECAUTION 1. IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ignition Switch (Position) Engine ...