TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Sliding Roof / Sliding Roof Switch Assembly

Toyota Tacoma (2015-2018) Service Manual: Sliding Roof Switch Assembly

Components

COMPONENTS

ILLUSTRATION

Installation

Installation

INSTALLATION

PROCEDURE

1. INSTALL SLIDING ROOF SWITCH ASSEMBLY (ROOF CONSOLE BOX ASSEMBLY)

(a) Connect the connector.

(b) Engage the 4 clips to install the sliding roof switch assembly (roof console box assembly).

Removal

REMOVAL

PROCEDURE

1. REMOVE SLIDING ROOF SWITCH ASSEMBLY (ROOF CONSOLE BOX ASSEMBLY)

(a) Using a moulding remover D, disengage the 4 clips to separate the sliding roof switch assembly (roof console box assembly).

(b) Disconnect the connector to remove the sliding roof switch assembly (roof console box assembly).

    Related Tacoma materials

    Hood Opening and Safety
    To open the hood of the Toyota Tacoma, first release the primary hood lock from inside the vehicle, then disengage the secondary catch at the front of the hood. Opening the hood 1. Pull the hood lock release lever located inside the vehicle. The primary latch will release and the hood will rise slig ...

    Removal
    REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) 2. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab) 3. REMOVE COWL SIDE TRIM BOARD LH 4. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 6. ...

    Rear Speed Sensor
    Removal REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notic ...