TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

Toyota Tacoma (2015-2018) Service Manual: Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC Code

DTC Detection Condition

Trouble Area

U0073

CAN bus connection error

CAN communication system

U0100

CAN reception error

U0129

CAN reception error

U0140

CAN reception error

U0155

CAN reception error

U0164

CAN reception error

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs (See page (b) Recheck for DTCs and check that no DTCs are output (See page ).

(b) Recheck for DTCs and check that no DTCs are output (See page OK: ).

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK

NG

GO TO CAN COMMUNICATION SYSTEM

    Related Tacoma materials

    Diagnosis System
    DIAGNOSIS SYSTEM DIAGNOSIS FUNCTION (a) The diagnosis function turns off the cruise control indicator, illuminates the master warning light and displays a warning message when a malfunction is detected. When a malfunction is detected in the dynamic radar cruise control system, DTCs are store ...

    Headlight Dimmer Switch Circuit
    DESCRIPTION The main body ECU (multiplex network body ECU) receives the following switch information: Light control switch position is off (DRL OFF), tail, head or AUTO (DRL). Dimmer switch position is high, low or high flash (pass). Front fog light switch position is on or off ...

    Open in Bus 2 Main Bus Line
    DESCRIPTION There may be an open circuit in one of the CAN main bus lines and/or a central gateway ECU (network gateway ECU) branch lines when the resistance between terminals 18 (CA4H) and 17 (CA4L) of the central gateway ECU (network gateway ECU) is 70 Ω or higher. Detection It ...