TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Theft Deterrent / Security Horn Assembly

Toyota Tacoma (2015-2018) Service Manual: Security Horn Assembly

Components

COMPONENTS

ILLUSTRATION

Inspection

Inspection

INSPECTION

PROCEDURE

1. INSPECT SECURITY HORN ASSEMBLY

(a) Check the operation.

(1) Apply battery voltage and check operation of the security horn assembly.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 1

Battery negative (-) → Horn bracket

Horn sounds

If the result is not as specified, replace the security horn assembly.

Removal

REMOVAL

PROCEDURE

1. REMOVE AIR INJECTION CONTROL DRIVER (for 2TR-FE)

(a) Disconnect the 2 connectors.

(b) Remove the 2 bolts and air injection control driver.

2. REMOVE SECURITY HORN ASSEMBLY

(a) Disconnect the connector.

(b) Remove the bolt.

(c) Disengage the guide to remove the security horn assembly.

Installation

INSTALLATION

PROCEDURE

1. INSTALL SECURITY HORN ASSEMBLY

(a) Engage the guide to install the security horn assembly.

(b) Install the bolt.

(c) Connect the connector.

2. INSTALL AIR INJECTION CONTROL DRIVER (for 2TR-FE)

(a) Install the air injection control driver with the 2 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(b) Connect the 2 connectors.

    Related Tacoma materials

    Installation
    INSTALLATION PROCEDURE 1. INSTALL ROOF HEADLINING ASSEMBLY (a) Insert the roof headlining assembly into the vehicle from the front door RH side. NOTICE: Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and ...

    PTC Heater Circuit
    DESCRIPTION PTC HTR heater relays are closed in accordance with signals from the air conditioning amplifier assembly and power is supplied to the quick heater assembly installed on the radiator heater unit. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits rela ...

    Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT NOTICE: When installing the hood bulge protector, heat the hood bulge surface using the infrared light. Do not heat the hood bulge excessively. Item Temperature Hood Bulge ...