DESCRIPTION
The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter. Then, the main body ECU (multiplex network body ECU) sends the remote control signals to the sliding roof ECU (sliding roof drive gear sub-assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear sub-assembly) receives those signals and activates the sliding roof motor.
CAUTION / NOTICE / HINT
NOTICE:
- The sliding roof key-linked function and sliding roof wireless transmitter-linked
function can be customized. Make sure that both functions are ON (See page
.gif)
). - When the sliding roof ECU (sliding roof drive gear sub-assembly) is
removed and reinstalled or replaced, the sliding roof ECU (sliding roof
drive gear sub-assembly) must be initialized (See page
).
- Since the sliding roof system has functions that use LIN communication,
first confirm that there is no malfunction in the LIN communication system
with the How to Proceed with Troubleshooting procedure (See page
).
- When sliding roof ECU (sliding roof drive gear sub-assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear sub-assembly) DTC.
PROCEDURE
|
1. |
CHECK REMOTE CONTROL FUNCTION |
(a) Check the key-linked and wireless transmitter-linked function (See page
).
|
Result |
Proceed to |
|---|---|
|
The roof glass does not operate by the key-linked or wireless transmitter-linked function, |
A |
|
The roof glass operates by both the key-linked and wireless transmitter-linked function. |
B |
| B | .gif) |
USE SIMULATION METHOD TO CHECK |
|
.gif)
|
2. |
CHECK SLIDING ROOF OPERATION |
(a) Check the sliding roof operation (See page
).
OK:
Sliding roof operation operates normally.
| NG | |
GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control) |
|
|
3. |
REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) |
(a) Replace the sliding roof ECU (sliding roof drive gear sub-assembly) (See
page ).
|
|
4. |
INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) |
(a) Initialize the sliding roof ECU (sliding roof drive gear sub-assembly) (See
page ).
|
|
5. |
CHECK REMOTE CONTROL FUNCTION |
(a) Check the key-linked and wireless transmitter-linked function (See page
).
OK:
The key-linked and wireless transmitter-linked function operates normally.
| OK | |
END (SLIDING ROOF ECU WAS DEFECTIVE) |
| NG | |
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
