PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
|
Symptom |
Suspected Area |
See page |
|---|---|---|
|
When the shift lever is in R, the rear view monitor image is not displayed. |
Proceed to "Reverse Signal Circuit" |
|
|
Proceed to "Radio Receiver Power Source Circuit"*1 |
|
|
|
Proceed to "Radio Receiver Power Source Circuit"*2 |
|
|
|
Radio and Display Receiver Assembly*1 |
|
|
|
Navigation Receiver Assembly*2 |
|
|
|
When the shift lever is in R, the rear view monitor image is not displayed (screen is blue for 3 seconds and then turns off). |
Proceed to "Image from Camera for Rear View Monitor is Abnormal" |
|
|
Radio and Display Receiver Assembly*1 |
|
|
|
Navigation Receiver Assembly*2 |
|
|
|
When the shift lever is not in R, the rear view monitor image is displayed. |
Proceed to "Reverse Signal Circuit" |
|
|
Radio and Display Receiver Assembly*1 |
|
|
|
Navigation Receiver Assembly*2 |
|
|
|
Image from the camera for the rear view monitor is abnormal (color, distorted picture). |
Proceed to "Image from Camera for Rear View Monitor is Abnormal" |
|
|
Radio and Display Receiver Assembly*1 |
|
|
|
Navigation Receiver Assembly*2 |
|
.gif)
- *1: w/o Navigation System
- *2: w/ Navigation System
HINT:
When the amber LED light is illuminated on the radio and display receiver assembly*1 or navigation receiver assembly*2 with the ignition switch ON and the shift lever position R, this indicates that the monitor image has been canceled manually. Check if the image will be displayed by pressing the AUTO button.
