Components
COMPONENTS
ILLUSTRATION
|
*1 |
SKID CONTROL BUZZER |
- |
- |
Inspection
INSPECTION
PROCEDURE
1. INSPECT SKID CONTROL BUZZER
|
(a) Make sure that there is no looseness in the locking part and connecting part of the connector. |
|
(b) Disconnect the skid control buzzer connector.
(c) Check the connector and terminals for deformation and corrosion.
OK:
No deformation or corrosion.
(d) Connect a positive (+) lead from the battery to terminal 1, and a negative (-) lead to terminal 2 of the skid control buzzer, and check that the buzzer sounds.
OK:
The skid control buzzer sounds.
If the result is not as specified, replace the skid control buzzer.
Removal
REMOVAL
PROCEDURE
1. REMOVE SKID CONTROL BUZZER
|
(a) Disengage the clamp. |
|
(b) Disconnect the connector to remove the skid control buzzer.
NOTICE:
If the skid control buzzer has been struck or dropped, replace it with a new one.
Installation
INSTALLATION
PROCEDURE
1. INSTALL SKID CONTROL BUZZER
(a) Connect the connector.
(b) Engage the clamp to install the skid control buzzer.
NOTICE:
If the skid control buzzer has been struck or dropped, replace it with a new one.
HINT:
Make sure to install the skid control buzzer in the correct direction.
