TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Ac60e Automatic Transmission / Transaxle / Pattern Select Switch

Toyota Tacoma (2015-2018) Service Manual: Pattern Select Switch

Components

COMPONENTS

ILLUSTRATION

Removal

Removal

REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL

(See page 2. REMOVE PATTERN SELECT SWITCH ASSEMBLY 2. REMOVE PATTERN SELECT SWITCH ASSEMBLY )

2. REMOVE PATTERN SELECT SWITCH ASSEMBLY

(a) Detach the 2 claws to remove the pattern select switch assembly from the instrument panel lower center finish panel.

Inspection

INSPECTION

PROCEDURE

1. INSPECT PATTERN SELECT SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a

Component without harness connected

(Pattern Select Switch Assembly)

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

4 (B) - 1 (E)

Pattern select switch pushed

Below 1 Ω

Pattern select switch not pushed

10 kΩ or higher

If the result is not as specified, replace the pattern select switch assembly.

Installation

INSTALLATION

PROCEDURE

1. INSTALL PATTERN SELECT SWITCH ASSEMBLY

(a) Attach the 2 claws to install the pattern select switch assembly to the instrument panel lower center finish panel.

2. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL

(See page Automatic Transmission Unit(for 2gr-fks) Automatic Transmission Unit(for 2gr-fks) )

    Related Tacoma materials

    Components
    COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

    Operation Check
    OPERATION CHECK 1. CHECK WINDOW LOCK SWITCH HINT: Before performing the window lock switch operation check, make sure that the window lock switch is off (the switch is not pushed in). (a) Check that the front passenger and rear windows cannot be operated from each power window regulator swit ...

    Brake Warning Light Remains ON
    DESCRIPTION The BRAKE warning light comes on when brake fluid is insufficient, the parking brake is applied or the EBD is defective. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ...