TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Audio / Video / Noise Filter(for 2gr-fks)

Toyota Tacoma (2015-2018) Service Manual: Noise Filter(for 2gr-fks)

Components

COMPONENTS

ILLUSTRATION

Removal

Removal

REMOVAL

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE V-BANK COVER

(See page 3. REMOVE AIR CLEANER ASSEMBLY 3. REMOVE AIR CLEANER ASSEMBLY )

3. REMOVE AIR CLEANER ASSEMBLY

(See page 4. REMOVE RADIO SETTING CONDENSER )

4. REMOVE RADIO SETTING CONDENSER

(a) Disconnect the connector.

(a) Disconnect the connector.

(b) Remove the tape and the radio setting condenser.

Installation

INSTALLATION

PROCEDURE

1. INSTALL RADIO SETTING CONDENSER

(a) Connect the connector.

(a) Connect the connector.

(b) Wind new vinyl tape around the hose and install the radio setting condenser.

2. INSTALL AIR CLEANER ASSEMBLY

(See page 3. INSTALL V-BANK COVER )

3. INSTALL V-BANK COVER

(See page 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL )

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

    Related Tacoma materials

    System Description
    SYSTEM DESCRIPTION 1. SEAT BELT WARNING SYSTEM DESCRIPTION (a) Seat belt warning light operation for driver seat belt: The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever posit ...

    Precaution
    PRECAUTION 1. CAUTION REGARDING INTERFERENCE WITH ELECTRONIC DEVICES CAUTION: People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should keep away from the smart key system antennas. The radio waves ma ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT BUMPER ASSEMBLY (a) w/ Fog Light: (1) Connect the 2 connectors. (b) Engage the 3 claws and guide to install the front bumper assembly. (c) Remove the protective tape. (d) Install the 6 clips. (e) Engage the clamp. (f) Connect the connector. (g) Insta ...