TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / No Sound can be Heard from Speakers

Toyota Tacoma (2015-2018) Service Manual: No Sound can be Heard from Speakers

PROCEDURE

1.

CHECK AUDIO SETTINGS

(a) Display the "Sound Settings" screen.

(b) Set volume, fader and balance to the initial values and check that sound is normal.

OK:

Audio system returns to normal.

HINT:

Sound quality adjustment measures vary according to the type of amplifier.

OK

END
NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Related Tacoma materials

    Open in Driver Side Electrical Antenna Circuit (B27A1)
    DESCRIPTION The certification ECU (smart key ECU assembly) generates a request signal and transmits the signal to the front door outside handle assembly LH [electrical key antenna] at intervals of 0.25 seconds. For the front door outside handle assembly LH [electrical key antenna] to detect w ...

    Slave Module Horizontal Axis Misalignment (C1AC2)
    DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor RH deviates more than the allowable range from the horizontal axis. HINT: If drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor ...

    Operation Check
    OPERATION CHECK 1. CHECK SMART KEY SYSTEM (for Entry Function) OPERATION NOTICE: Make sure that the smart key system (for Entry Function) has not been canceled before performing this inspection. (a) Check the entry unlock function (driver door). (1) Perform a wireless lock operation to lock t ...