TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Brake Control / Dynamic Control Systems / Vehicle Stability Control System(for Vacuum Brake Booster) / Motor Circuit Malfunction (C1428)

Toyota Tacoma (2015-2018) Service Manual: Motor Circuit Malfunction (C1428)

DESCRIPTION

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1428

Motor Circuit Malfunction

With the motor relay and motor fail-safe relay OFF, open or short in motor circuit continues for 2 seconds or more.

Brake actuator assembly (Motor circuit)

WIRING DIAGRAM

Refer to DTCs C142B, C146C and C146D (See page CAUTION / NOTICE / HINT ).

CAUTION / NOTICE / HINT

NOTICE:

When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information (See page PROCEDURE PROCEDURE ).

PROCEDURE

1.

CHECK HARNESS AND CONNECTOR (GND2 TERMINAL)

(a) Turn the ignition switch off.

(b) Make sure that there is no looseness at the locking part and the connecting part of the connectors.

(c) Disconnect the S1 skid control ECU (brake actuator assembly) connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

S1-1 (GND2) - Body ground

Always

Below 1 Ω
Text in Illustration

*a

Front view of wire harness connector

(to Skid Control ECU [Brake Actuator Assembly])
OK

REPLACE BRAKE ACTUATOR ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (GND2 CIRCUIT)
    Related Tacoma materials

    Sliding Roof Switch Assembly
    Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL SLIDING ROOF SWITCH ASSEMBLY (ROOF CONSOLE BOX ASSEMBLY) (a) Connect the connector. (b) Engage the 4 clips to install the sliding roof switch assembly (roof console box assembly). Removal REMOVAL P ...

    Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. INSTALL SEPARATE TYPE REAR SEATBACK COVER (a) Using hog ring pliers, install the separate type rear seatback cover with 2 new hog rings. Text in Il ...

    Listening to a USB memory device
    Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Select “USB” on the “Select Audio Source” screen. Connecting a USB memory device Audio control screen 1. “Select Audio Source” screen appears 2. Displaying the folder list 3. Random playback 4 ...