TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Park Assist / Monitoring / Intuitive Parking Assist System / Lost Communication with ECM / PCM "A" (U0100-U0142,U0155)

Toyota Tacoma (2015-2018) Service Manual: Lost Communication with ECM / PCM "A" (U0100-U0142,U0155)

DESCRIPTION

These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication system.

DTC No.

DTC Detection Condition

Trouble Area

U0100

Lost Communication with ECM / PCM "A"

CAN communication system

U0101

Lost Communication with TCM

U0142

Lost Communication with Body Control Module "B"

U0155

Lost Communication with Instrument Panel Cluster Control Module (Combination Meter)

HINT:

When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.

PROCEDURE

1.

CHECK DTC OUTPUT

(a) Clear the DTCs (See page (b) Check for DTCs (See page ). ).

(b) Check for DTCs (See page Result ).

Result

Result

Proceed to

DTCs (CAN communication system DTC) are output

A

No DTCs are output

B
A

GO TO CAN COMMUNICATION SYSTEM

B

USE SIMULATION METHOD TO CHECK

    Related Tacoma materials

    Automatic transmission
    Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever 5-speed models While the engine switch is on, depress the brake pedal and move the shift lever. 4-speed models While the engine switch is on, depress the brake pedal and move the shift l ...

    Brake Switch "A" Signal Compare Failure (P057162)
    DESCRIPTION When the brake pedal is depressed, stop light switch assembly sends a signal to the ECM. Upon receiving the signal, the ECM cancels the cruise control system. DTC Code DTC Detection Condition Trouble Area MIL Note ...

    Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for both the RH and LH sides. The procedure described below is for the LH side. PROCEDURE 1. INSTALL SIDE AIRBAG SENSOR ASSEMBLY (a) Check that the ignition switch is OFF. (b) Check that the cable is disconnec ...