TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Horn / Horn Relay

Toyota Tacoma (2015-2018) Service Manual: Horn Relay

On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT HORN RELAY ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Connection

Specified Condition

3 - 5

Battery voltage not applied between terminals 1 and 2

10 kΩ or higher

3 - 5

Battery voltage applied between terminals 1 and 2

Below 1 Ω

If the result is not as specified, replace the horn relay assembly.
    Related Tacoma materials

    Using the interior lights
    Interior lights list Interior light Personal lights (Access Cab and Double Cab models) ■Illuminated entry system When the interior light switch is in the DOOR position, the interior light automatically turns on/off according to whether the doors are locked/unlocked and whether the ...

    Automatic Disconnecting Differential Motor Limit Switch Circuit (P17A4)
    DESCRIPTION When the A.D.D. actuator switches between 2WD and 4WD, the DL1 and DL2 terminals of the limit switch and ADD terminal of the A.D.D. position switch change to one of the following ON/OFF combinations listed in the table below. Terminal In 2WD Switchi ...

    Freeze Frame Data
    FREEZE FRAME DATA 1. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Navigation System / Trouble Codes. (e) Select a PTC to display its Freeze Frame Data. 2. LIST ...