DESCRIPTION
C1A10 is output when there is an internal malfunction in the millimeter wave radar sensor assembly.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
|---|---|---|---|---|
|
C1A10 |
Front Radar Sensor |
While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, the internal malfunction of the millimeter wave radar sensor assembly continues for 0.3 seconds or more. |
Millimeter wave radar sensor assembly |
Does not come on |
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the millimeter wave radar sensor assembly, make sure to replace it with a new one. If a device which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle, and as a result, a DTC may be stored.
- When the millimeter wave radar sensor assembly is replaced with a new
one, adjustment of the radar sensor beam axis must be performed.
Click here
.gif)
PROCEDURE
|
1. |
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
(a) Replace the millimeter wave radar sensor assembly with a new one.
Click here
(b) Perform millimeter wave radar sensor assembly adjustment.
Click here
|
.gif)
|
2. |
CLEAR FOR DTCs (RADAR CRUISE 2) |
(a) Clear the DTCs.
Click here
| NEXT | .gif) |
END (MILLIMETER WAVE RADAR SENSOR ASSEMBLY WAS DEFECTIVE) |
