DESCRIPTION
This DTC is output when a short to ground in the oil temperature sensor is detected.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
P17C7 |
Front Differential Oil Temperature Sensor Circuit Low |
|
|
WIRING DIAGRAM
PROCEDURE
|
1. |
CHECK HARNESS AND CONNECTOR (4 WHEEL DRIVE CONTROL ECU AND OIL TEMPERATURE SENSOR - BODY GROUND) |
(a) Disconnect the F13 4 wheel drive control ECU connector.
(b) Disconnect the F38 oil temperature sensor connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
F13-5 (DT) or F38-1 (DT) - Body ground |
Always |
10 kΩ or higher |
|
F13-25 (DGND) or F38-2 (DGND) - Body ground |
Always |
10 kΩ or higher |
| NG | |
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
2. |
INSPECT OIL TEMPERATURE SENSOR |
(a) Disconnect the F38 oil temperature sensor connector.
|
(b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
|
| OK | |
REPLACE 4 WHEEL DRIVE CONTROL ECU |
| NG | |
REPLACE OIL TEMPERATURE SENSOR |

