TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Pre-collision / Pre-collision System / Front Camera Module Circuit (C1AA0)

Toyota Tacoma (2015-2018) Service Manual: Front Camera Module Circuit (C1AA0)

DESCRIPTION

The millimeter wave radar sensor assembly receives information about the area in front of the vehicle from the forward recognition camera.

If the millimeter wave radar sensor assembly detects a malfunction in the forward recognition camera, it will store DTC C1AA0.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA0

Front Camera Module Circuit

While the ignition switch is ON, the forward recognition camera detects an internal malfunction for approximately 1 second or more.

Forward recognition camera system

PROCEDURE

1.

GO TO FORWARD RECOGNITION CAMERA SYSTEM

HINT:

If DTC C1AA0 is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.

Click here

NEXT

END
    Related Tacoma materials

    Installation
    INSTALLATION PROCEDURE 1. TEMPORARILY TIGHTEN FRONT SUSPENSION LOWER ARM (a) Align the matchmarks on the camber adjust cam No. 2 and toe adjust cam. Temporarily tighten the bolt and the nut. (b) Install the front lower ball joint attachment, a new nut and a new cotter pin. Torque: 140 N ...

    Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier
    DESCRIPTION This circuit sends a signal to the stereo component amplifier assembly to mute noise. Because of that, the noise produced by changing the sound source ceases. If there is an open in the circuit, noise can be heard from the speakers when changing the sound source. If there is a sho ...

    Fuel Sender Open Detected (B1500)
    DESCRIPTION This DTC is output when the combination meter assembly detects a fuel sender gauge assembly malfunction. DTC No. DTC Detection Condition Trouble Area B1500 When either of the following conditions is detected: ...