TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Park Assist / Monitoring / Intuitive Parking Assist System / Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the back sonar or clearance sonar switch assembly on.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Intuitive P/A / Trouble Codes.

(f) Check for DTCs (See page 2. CLEAR DTC ).

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the back sonar or clearance sonar switch assembly on.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Intuitive P/A / Trouble Codes.

(f) Clear the DTCs.

    Related Tacoma materials

    Antenna Coil Open / Short (B2784)
    DESCRIPTION When an open or short circuit is detected in the transponder key amplifier coil built into the engine switch, the certification ECU (smart key ECU assembly) stores this DTC. This DTC is also stored as a past DTC. DTC Code DTC Detection Condition Tro ...

    System Diagram
    SYSTEM DIAGRAM Communication Table Transmitting ECU (Transmitter) Receiving ECU (Receiver) Signal Line Certification ECU (Smart Key ECU Assembly) Main Body ECU (Multiplex Network Body ECU) ...

    Pressure Control Solenoid "G" Electrical (Shift Solenoid Valve SL4) (P2810)
    DESCRIPTION Changing from 1st to 6th is performed by the ECM turning shift solenoid valves SL1, SL2, SL3 and SL4 on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated ...