TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Pre-collision / Pre-collision System / Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.

(e) Check for DTCs.

Click here CLEAR DTC

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.

(e) Clear the DTCs.

Click here Freeze Frame Data

    Related Tacoma materials

    Steering Pad Switch Circuit
    DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the navigation receiver assembly. If there is an open in the circuit, the audio system cannot be operated using the steering pad switch assembly. If there is a short in the circuit, the same condition ...

    Drive Mode Select: Modes and Operation
    The available driving modes can be selected to match different road conditions and driving preferences, allowing the Toyota Tacoma to adjust its operating characteristics for the situation. System components "DRIVE MODE" switch used to open the driving mode selection function Mode select switch ...

    Precaution
    PRECAUTION 1. EXPRESSIONS OF IGNITION SWITCH HINT: The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ignition Switch (Position) ...