TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Cruise Control / Dynamic Radar Cruise Control System(for 2tr-fe) / Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Radar Cruise 1*1 / Trouble Codes.

(e) Enter the following menus: Powertrain / Radar Cruise 2*2 / Trouble Codes.

(f) Check for DTCs.

Click here

  • *1: Stored in the ECM
  • *2: Stored in the millimeter wave radar sensor assembly

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Radar Cruise 1*1 / Clear DTCs.

(e) Enter the following menus: Powertrain / Radar Cruise 2*2 / Clear DTCs.

(f) Clear the DTCs.

  • *1: Stored in the ECM
  • *2: Stored in the millimeter wave radar sensor assembly
    Related Tacoma materials

    On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check (See page ). (b) With the lower No. 2 instrument panel airbag assembly ...

    Diagnosis System
    DIAGNOSIS SYSTEM 1. DESCRIPTION When troubleshooting a vehicle with the diagnosis system, the only difference from the usual troubleshooting procedure is connecting the Techstream to the vehicle and reading various data output from the vehicle's skid control ECU (brake actuator assembly) ...

    TRAC OFF Indicator Light does not Come ON
    DESCRIPTION Refer to TRAC OFF Indicator Light Remains ON (See page ). WIRING DIAGRAM Refer to TRAC OFF Indicator Light Remains ON (See page ). CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ). ...