Toyota Tacoma (2015-2018) Service Manual: Customize Parameters
CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Wireless Door Lock.
(5) Select the setting by referring to the table below.
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Wireless Control |
ON |
Function that turns wireless door lock |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Hazard Answer Back |
ON |
When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice. |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Open Door Warning |
OFF |
The buzzer sounds when lock is pressed when any of the doors are ajar. |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Unlock 2 Operation |
ON |
Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Panic Function |
ON |
Function to operate theft deterrent system by continuously pressing panic switch on door control transmitter module set sub-assembly for 0.8 seconds |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Auto Lock Time |
60 s |
Function that regulates the interval between unlocking and automatic relocking of doors |
30 s, 60 s or 120 s |
Main body ECU (Multiplex network body ECU) |
|
Wireless Auto Lock |
ON |
This function turns the wireless auto lock function on or off. |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Wireless Buzzer Resp |
ON |
Wireless door lock buzzer response |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
|
Wireless Buzzer Vol |
Level 5 |
Wireless door lock buzzer volume |
Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level 0 |
Main body ECU (Multiplex network body ECU) |
|
Wireless Lock Function with Doors Open |
ON |
Function that locks all the doors after the door that was ajar or open when the lock switch of the door control transmitter module set sub-assembly was pressed is closed |
OFF or ON |
Main body ECU (Multiplex network body ECU) |
(b) Customizing with the Multi-display (w/ Navigation System)
(1) Turn the ignition switch to ON.
(2) Enter the following menus: APPS / Setup / Vehicle / Vehicle Customization / Door Lock Settings.
(3) Select the setting by referring to the table below.
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Remote 2-Press Unlock |
On |
Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock. |
On or Off |
Main body ECU (Multiplex network body ECU) |
|
Auto Relock Timer |
60 s |
Function that regulates the interval between unlocking and automatic relocking of doors |
Off, 30 s, 60 s or 120 s |
Main body ECU (Multiplex network body ECU) |
(c) Customizing with the Multi-display (w/ Audio and Visual System)
(1) Turn the ignition switch to ON.
(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.
(3) Select the setting by referring to the table below.
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Remote 2-Press Unlock |
On |
Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock. |
On or Off |
Main body ECU (Multiplex network body ECU) |
|
Auto Relock Timer |
60 s |
Function that regulates the interval between unlocking and automatic relocking of doors |
Off, 30 s, 60 s or 120 s |
Main body ECU (Multiplex network body ECU) |
Operation Check
OPERATION CHECK
1. NOTICE WHEN CHECKING THE FOLLOWING
(a) Wireless door lock/unlock function:
This wireless door lock control function operates only when the following 3 conditions
are met:
(1) ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are lis ...
Other materials:
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT BRAKE MASTER CYLINDER FLUID PRESSURE CHANGE
(a) Inspect the battery positive voltage.
Battery positive voltage:
10 to 14 V
(b) Turn the ignition switch to OFF, and depress the brake pedal more than 20
times.
HINT:
When pressure in the accumulator ...
Voice Recognition Microphone Disconnected (B1579)
DESCRIPTION
The navigation receiver assembly and telephone microphone assembly are connected
to each other using the microphone connection detection signal lines.
This DTC is stored when the microphone connection detection signal is disconnected.
DTC Code
DTC Detection Con ...
Check For Intermittent Problems
CHECK FOR INTERMITTENT PROBLEMS
1. CHECK FOR INTERMITTENT PROBLEMS
HINT:
A momentary interruption (open circuit) in the connectors and/or wire harnesses
between the sensors and ECUs can be detected using the ECU Data List function of
the Techstream.
(a) Turn the ignition switch off.
(b) Con ...
