TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Cruise Control / Cruise Control Main Switch

Toyota Tacoma (2015-2018) Service Manual: Cruise Control Main Switch

Components

COMPONENTS

ILLUSTRATION

Removal

Removal

REMOVAL

PROCEDURE

1. REMOVE STEERING PAD ASSEMBLY

(See page 2. REMOVE CRUISE CONTROL MAIN SWITCH 2. REMOVE CRUISE CONTROL MAIN SWITCH )

2. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector and remove the 2 screws.

(b) Remove the cruise control main switch from the steering wheel.

Installation

INSTALLATION

PROCEDURE

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the cruise control main switch with the 2 screws and connect the connector.

Torque:

2.4 N·m {24 kgf·cm, 21 in·lbf}

2. INSTALL STEERING PAD ASSEMBLY

(See page Cruise Control System(for 2gr-fks) Cruise Control System(for 2gr-fks) )

    Related Tacoma materials

    7-Inch Gauge Cluster and Meters
    The meters provide the driver with a variety of important driving and vehicle information, allowing key Toyota Tacoma operating conditions to be checked at a glance. Meter display The measurement units shown on the meter and display may vary depending on the target region and the specifications ...

    Sending Malfunction (Navigation to APGS) (U0073,U0100,U0140,U0155)
    DESCRIPTION These DTCs are stored when a malfunction occurs in the CAN communication circuit. DTC No. DTC Detection Condition Trouble Area U0073 CAN bus connection error CAN communication system U0100 ...

    Multi-Terrain Monitor: Off-Road Camera Views
    The Multi-terrain Monitor helps the driver observe the area surrounding the Toyota Tacoma and better understand nearby terrain and obstacles. It is designed to provide additional visual information in a variety of situations, including evaluating surface conditions during off-road driving and checki ...