TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Engine Immobiliser / Certification Ecu

Toyota Tacoma (2015-2018) Service Manual: Certification Ecu

Components

COMPONENTS

ILLUSTRATION

Installation

Installation

INSTALLATION

PROCEDURE

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.

Torque:

6.5 N·m {66 kgf·cm, 58 in·lbf}

(b) Engage the clamp to install the wire harness.

(c) Connect the 3 connectors.

2. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

(See page ) ) )

Removal

REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

(See page ) ) )

2. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disconnect the 3 connectors.

(b) Disengage the clamp to separate the wire harness.

(c) Remove the 2 nuts and certification ECU (smart key ECU assembly).
    Related Tacoma materials

    Navigation Receiver
    Components COMPONENTS ILLUSTRATION ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (See page ) 2. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (a) Remove the 4 bolts. (b ...

    Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE TAIL GATE PROTECTOR (See page ) 2. REMOVE TAIL GATE SERVICE HOLE COVER (a) Using a T30 "TORX" socket wrench, remove the 8 screws and tail gate service hole cover. 3. REMOVE REAR TELEVISION CAMER ...

    Blind Spot Monitor: Detection and Warnings
     Vehicles that can be detected by the Blind Spot Monitor The Blind Spot Monitor uses rear side radar sensors to monitor specific areas alongside and behind the Toyota Tacoma. When the system detects certain vehicles traveling in adjacent lanes, it alerts the driver to their presence through the ...