TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Air Conditioning / Air Conditioning Amplifier

Toyota Tacoma (2015-2018) Service Manual: Air Conditioning Amplifier

Components

COMPONENTS

ILLUSTRATION

Installation

Installation

INSTALLATION

PROCEDURE

1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) Install the air conditioner amplifier assembly with the 2 bolts.

Torque:

7.0 N·m {71 kgf·cm, 62 in·lbf}

(b) Connect the 2 connectors.

2. INSTALL INSTRUMENT LOWER PANEL ASSEMBLY

3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

(See page Removal Removal )

Removal

REMOVAL

PROCEDURE

1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

(See page 2. REMOVE INSTRUMENT LOWER PANEL ASSEMBLY 2. REMOVE INSTRUMENT LOWER PANEL ASSEMBLY )

2. REMOVE INSTRUMENT LOWER PANEL ASSEMBLY

3. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY 3. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

3. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) Disconnect the 2 connectors.

(a) Disconnect the 2 connectors.

(b) Remove the 2 bolts and air conditioning amplifier assembly.

    Related Tacoma materials

    Data List / Active Test
    DATA LIST / ACTIVE TEST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or s ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR ENGINE OIL SEAL (a) Apply MP grease to the lip of a new rear engine oil seal. NOTICE: Keep the lip free of foreign matter. (b) Using SST, tap in a new rear engine oil seal until its surface is flush with the rear engine oil seal retainer ed ...

    How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the air conditioning system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...