REMOVAL
PROCEDURE
1. REMOVE REAR SEAT CUSHION ASSEMBLY
(a) Remove the 2 bolts and rear seat cushion assembly. |
|
2. REMOVE REAR SEATBACK HINGE COVER
(a) for LH Side: (1) Disengage the 6 claws to remove the 2 rear seatback hinge covers. |
|
(b) for RH Side:
(1) Remove the rear seatback hinge cover (See page ).
3. REMOVE REAR SEATBACK ASSEMBLY LH
(a) Remove the 2 bolts and rear seatback assembly LH. |
|
4. REMOVE REAR SEATBACK ASSEMBLY RH
5. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY
(a) Remove the 2 bolts and rear seatback hinge sub-assembly. |
|
6. REMOVE LUGGAGE COMPARTMENT SIDE TRAY
7. REMOVE REAR SEATBACK CENTER HINGE SUB-ASSEMBLY
(a) Remove the 2 bolts and rear seatback center hinge sub-assembly. |
|
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Perform "Inspection After Repairs" after replacing the fuel pump assembly (See
page ).
PROCEDURE
1. SET FUEL PUMP ASSEMBLY
HINT:
Perform "Inspection After Repairs" after replacing the fuel pump assembly (See
page ).
...
Lost Communication with ECM (C1437)
DESCRIPTION
The skid control ECU (brake actuator assembly) receives signals from the ECM
via the CAN communication system.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C1437
Lost Communication with ECM
...
Short in GPS Antenna (B15C0,B15C1)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
DTC No.
DTC Detection Condition
Trouble Area
B15C0
Navigation antenna error
Navigation antenna assembly
Navigatio ...