REASSEMBLY
PROCEDURE
1. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
(a) Engage the 2 guides to install the console compartment door hinge sub-assembly. |
|
(b) Install the 4 screws.
(c) Engage the 2 guides and 4 claws to install the console compartment door moulding cover. |
|
2. INSTALL CONSOLE COMPARTMENT OUTER DOOR
(a) Engage the 2 guides and 2 claws to install the console compartment outer door. |
|
(b) Install the 4 screws.
3. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
(a) Engage the 2 guides and 4 claws to install the console compartment door sub-assembly. |
|
(b) Install the 6 screws.
(c) Engage the 2 guides to install the console compartment door lock lever. |
|
(d) Install the 2 screws.
4. INSTALL CONSOLE COMPARTMENT DOOR CUSHION
HINT:
Use the same procedure as for the opposite side.
(a) Engage the claw to install the console compartment door cushion. |
|
Short in Driver Side Squib 2nd Step Circuit (B1810/53-B1813/53)
DESCRIPTION
The driver side squib 2nd step circuit consists of the airbag sensor assembly,
the spiral cable with sensor sub-assembly and the horn button assembly.
The circuit signals the SRS to deploy when airbag deployment conditions are met.
These DTCs are set when a malfunction is detected i ...
Cellular Phone Inspection
PROCEDURE
1.
CHECK USAGE CONDITION
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make
sure to obtain the permission of the customer before performin ...
Rear Differential Lock Position SW Stuck OFF (P17BB)
DESCRIPTION
This DTC is output when an OFF malfunction of the differential lock indicator
switch is detected.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
P17BB
Rear Differential Lock Position SW Stuck OFF
...